Oil cooler torques om352 - Druckversion

+- Das MB-trac Forum (https://www.trac-technik.de/Forum)
+-- Forum: Rund um den MB-trac (https://www.trac-technik.de/Forum/forumdisplay.php?fid=1)
+--- Forum: MB-trac Forum (https://www.trac-technik.de/Forum/forumdisplay.php?fid=2)
+--- Thema: Oil cooler torques om352 (/showthread.php?tid=29161)

---

Oil cooler torques om352 - Jonasbe - 25.11.2015

Hello, i hope you accept me to write in english!
I have a question about the oil cooler and the tightening torques on that one on a om352. I have changed it because of a crack in it but now i get water in the oil and have to get it off again an check the seals.

Thanks! / Jonas

---

RE: Oil cooler torques om352 - Stoll30 - 25.11.2015

Hello Jonas,

no problem to ask in english.
According the repair manual the bolts have to be fixed to a torque of 40Nm. Beginn with the bolts in the center, fix them crosswise and follow to the outer bolts.
Good luck in proceeding your work!

Cheers
Benedikt

---

RE: Oil cooler torques om352 - Jonasbe - 25.11.2015

Thanks for answear! Will fix It in the weekend!

/ Jonas

---